Swingarm Caps

Need help with your suspension? Ask inside.
john
Posts: 3872
Joined: Wed Mar 26, 2014 6:48 pm

Re: Swingarm Caps

Postby john » Sat Jun 27, 2020 1:16 pm

Just been poking around in the shed, found a bit of alloy that should be just about big enough :D

Mere
Posts: 73
Joined: Sun Feb 25, 2018 7:28 pm

Re: Swingarm Caps

Postby Mere » Sat Jun 27, 2020 2:05 pm

Happy days! :D

john
Posts: 3872
Joined: Wed Mar 26, 2014 6:48 pm

Re: Swingarm Caps

Postby john » Mon Jun 29, 2020 10:11 am

Bugger, it's 4mm to small, :x
Ordered some more, ;)

Mere
Posts: 73
Joined: Sun Feb 25, 2018 7:28 pm

Re: Swingarm Caps

Postby Mere » Mon Jun 29, 2020 3:38 pm

Much appreciated John and lets hope my measurements are up to scratch.. :lol:
Actually I am quite excited about this project as the bike will look so much better with an alloy cap 8-)

john
Posts: 3872
Joined: Wed Mar 26, 2014 6:48 pm

Re: Swingarm Caps

Postby john » Tue Jun 30, 2020 7:36 pm

Mere wrote:
Mon Jun 29, 2020 3:38 pm
Much appreciated John and lets hope my measurements are up to scratch.. :lol:
Actually I am quite excited about this project as the bike will look so much better with an alloy cap 8-)
I'll get on to it as soone as the alloy arrives, should be here tomorrow/thursday. :D

john
Posts: 3872
Joined: Wed Mar 26, 2014 6:48 pm

Re: Swingarm Caps

Postby john » Sat Jul 04, 2020 8:34 pm

Damn alloy has not come yet, :x

john
Posts: 3872
Joined: Wed Mar 26, 2014 6:48 pm

Re: Swingarm Caps

Postby john » Mon Jul 06, 2020 10:24 am

Alloy has just arrived, kettle is on, then off to the shed, :D

Mere
Posts: 73
Joined: Sun Feb 25, 2018 7:28 pm

Re: Swingarm Caps

Postby Mere » Mon Jul 06, 2020 3:03 pm

Great news, thanks John! :D

john
Posts: 3872
Joined: Wed Mar 26, 2014 6:48 pm

Re: Swingarm Caps

Postby john » Mon Jul 06, 2020 9:22 pm

Mere wrote:
Mon Jul 06, 2020 3:03 pm
Great news, thanks John! :D
No problem :lol:

john
Posts: 3872
Joined: Wed Mar 26, 2014 6:48 pm

Re: Swingarm Caps

Postby john » Tue Jul 07, 2020 11:01 am

Got one finished, :D ....pics later.

Without having a 2nd gen top yoke on hand to make sure it's right, I dont want to send this first one only to find that it doesnt fit correctly, so,... to that end....I've purchased a 2nd gen top yoke, :D .
Mere wrote:
Mon Jul 06, 2020 3:03 pm
Great news, thanks John! :D
Once I've checked that it fits right, I'll send it to you, ;)


Who is online

Users browsing this forum: No registered users and 1 guest