unitrak service/exchange

Need help with your suspension? Ask inside.
john
Posts: 3924
Joined: Wed Mar 26, 2014 6:48 pm

Re: unitrak service/exchange

Postby john » Thu Oct 22, 2020 9:54 am

Mere wrote:
Wed Oct 21, 2020 7:30 pm
john wrote:
Wed Oct 14, 2020 1:20 pm
Managed to get some finished at last.

DSCF3253.JPG

Still only £66 post free.

Contact me for new payment method.

I can also supply the bushes, sleeve, and O rings for the swing arm on 2nd gen bikes if needed. £20 post free.
Yes please John, count me in for a Unitrack unit please! PM on its way, cheers Simon

PM sent, :D

Mere
Posts: 148
Joined: Sun Feb 25, 2018 7:28 pm

Re: unitrak service/exchange

Postby Mere » Thu Oct 22, 2020 6:38 pm

john wrote:
Thu Oct 22, 2020 9:54 am
Mere wrote:
Wed Oct 21, 2020 7:30 pm
john wrote:
Wed Oct 14, 2020 1:20 pm
Managed to get some finished at last.

DSCF3253.JPG

Still only £66 post free.

Contact me for new payment method.

I can also supply the bushes, sleeve, and O rings for the swing arm on 2nd gen bikes if needed. £20 post free.
Yes please John, count me in for a Unitrack unit please! PM on its way, cheers Simon

PM sent, :D
Much appreciated John & PM responded to.

john
Posts: 3924
Joined: Wed Mar 26, 2014 6:48 pm

Re: unitrak service/exchange

Postby john » Thu Oct 22, 2020 8:39 pm

It will be posted (well, UPS'ed) tomorrow, ;)

Mere
Posts: 148
Joined: Sun Feb 25, 2018 7:28 pm

Re: unitrak service/exchange

Postby Mere » Thu Oct 29, 2020 7:57 pm

Unitrack arrived and looks good, many thanks John!

Matthew
Posts: 5
Joined: Thu Jun 18, 2020 5:44 pm

Re: unitrak service/exchange

Postby Matthew » Mon Dec 28, 2020 9:43 pm

Hi John,

I have just sent you an email in regards to the unitrack service/exchange.
Thanks for your time.

Matthew

GPZWales
Posts: 4
Joined: Tue Jul 11, 2017 6:04 pm
Location: Nottingham
Contact:

Re: unitrak service/exchange

Postby GPZWales » Fri Feb 26, 2021 12:19 am

Hi John,

Are you still offering this service? Looking to rebuild mine, but don't want to pay the exorbitant prices for the bushings etc.

Cheers, Tom.
CBR125 and a GPZ500 project, which has been ongoing for a few years now.

Mere
Posts: 148
Joined: Sun Feb 25, 2018 7:28 pm

Re: unitrak service/exchange

Postby Mere » Fri Feb 26, 2021 8:05 pm

Hi Tom, firstly apologies to John for me responding in the first instance & do hope I am not treading on John's toes with this response. I brought a unit from John back in October last year (see upthread). Very nice it is too. However my bike has a non GPZ monoshock fitted (spaced dogbones etc) and the unit would not install to my satisfaction. This is not John's fault but entirely mine as his part is built to fit the standard spec. So this exchange unit has been fitted but not ridden / seen active service. Have sent you a PM. Many thanks, Simon

Sold to GPZWales on 27/03/2020

P1080549.JPG
P1080546.JPG
Last edited by Mere on Sat Mar 27, 2021 11:57 am, edited 2 times in total.

Peter0294
Posts: 1
Joined: Sat Mar 06, 2021 5:27 am

Re: unitrak service/exchange

Postby Peter0294 » Mon Mar 08, 2021 12:17 am

Hi John, I think I've managed to PM you but not too sure it's gone through. I'm hoping your still. Offering this service as I am in desperate need of a new unit rack as mine has certainly got some play in it. If you can get in touch with me and let me know that would be fantastic. Thanks in advance.

Kind regards.

Peter.

boba
Posts: 1
Joined: Sun Dec 27, 2020 11:10 pm

Re: unitrak service/exchange

Postby boba » Sun Mar 14, 2021 9:55 pm

Hi

Are you still doing the re con of the rear suspension linkage? If so I'm interested in one.many thanks

john
Posts: 3924
Joined: Wed Mar 26, 2014 6:48 pm

Re: unitrak service/exchange

Postby john » Wed May 12, 2021 1:21 pm

I think(hope) that I got back to everyone, and supplied all those who wanted one

For anyone who is interested in a unitrak then yes I am still doing them.

A PM or an email to me should get you a reply.


Who is online

Users browsing this forum: No registered users and 1 guest