Solenoid work around

Need help with your electronics? Ask inside.
Wilter
Posts: 7
Joined: Sun Oct 25, 2020 9:40 am

Solenoid work around

Postby Wilter » Thu Nov 12, 2020 11:38 pm

Hi, hope someone can help. I've just bought a gpz 500s D6 for a winter project. There is no power to the bike ive found a blown fuse 30amp which I've replaced, I have noticed that there are 4 wires coming from the solenoid block connector, only 3 appear in the circuit diagram, could this be a workaround??....I have heard the bike running and all the electrics working.Any help greatfully accepted

Martinj
Posts: 960
Joined: Fri Jan 08, 2016 8:18 pm
Location: Doncaster

Re: Solenoid work around

Postby Martinj » Mon Dec 07, 2020 5:46 am

If you haven’t done so already, I would check the wiring diagram in the Haynes manual & trace everything from there.
91 gpz500
79 cx500deluxe
Interceptor 650


Who is online

Users browsing this forum: No registered users and 1 guest